DESIGN FEATURES
The cases & covers are of cast iron. Units are weather proof & dust protected. Mechanism is Positive, Quick make & Quick break mechanism provided. All units are mechanically interlocked to prevent accidental contact of live part.

TECHNICAL FEATURES
Hard bright nickleplated contacts for high conductivity & longer life Full shrouded live parts. Cable terminals suitable for accommodating aluminium & copper conductors All contacts are prepared from electrolytic copper & extruded brass.

SALIENT FEATURES
Easy for installation and maintenance
1] Every facility is available for wiring , maintenance and fitting of cable boxes.
2] The terminals are suitable for aluminium & copper cables.

Quick make-and-break operation
Switches are provided with a spring assisted quick make-and-break operating machanism to minimize arcing. Low contact resistance
Besides providing liberal contact area, when copper contact blades meet brass terminals they are snugly held and constantly pressed against the smooth sides of the terminals.

FEATURES

• Readymade & customised solution for safe power distridution
• Modular/compact design provides economy of space and cost
• Simple and efficient system configuration
• Easy, flexible and time saving installation
• Shock proof design
• Elegant & sleek in appearance

APPLICATIONS
The busbar chambers find wide application in power distribution in areas namely :

• Construction site
• Shop floor
• Multi-storeyed complexes
• Building installation etc.

ENCLOSURES

• Enclosures are made of fabricated sheet steel.
• Rust protected sheet steel enclosures have a gray stoved paint finish. Enclosures have a robust, reliable construction.

FUSES

• Choice of HRC or Rewirable type fuse carrier is available, in TPN fuse Boards.
• If conversion is required from Rewirable to HRC type protection or vice versa it is only required to change the fuse carrier.

SALIENT FEATURES

• ON LOAD Type Tested & Proven Design
• Quick make & Quick break type mechanism
• Mechanically interlocked cover prevents opening in ON Position
• All live terminals are shrouded by means of - Removable Shields
• Track resistant insulating material for moist & tropical application
• Easily interchangeable components in case of maintenance

ENCLOSURES
Changeover switches are available in two type Cast iron & Sheetmetal enclosures

Specifications
Range : 16A, 25A & 32A

Rated Voltage
415V AC 50Hz

Attributes
Long Mechanical and Electrical life High making and breaking capacity Unbreakable inner plate

SPECIAL FEATURES

• Quick make Quick break mechanism independent of operator.
• Break mechanism is high speed.
• Adequate wiring space for neat & Quick wiring.
• All units are mechanically interlocked to prevent accidental contact of live parts.

FUSES
Switchfuse has facility to interchangeablility between HRC or Rewirable fuse carrier for the same fuse base. HRC carrier will accept bolted HRC fuselink to IS:9224 1979.

FEATURES

• Proven Starter.
• Reliable protection against overload.
• Suitable for tropical conditions, ensures reliable performace in high ambient temperatures, humidity and undervolate conditions.
• Visible ON/OFF indications.
• Dust, moisture and vermin proof enclosure.

FEATURES

• All non-ferrous metal component are electroplated.
• Fuse units are available in two types:
  1. TYPE A - Providing for busbar, connection at one end & cable termination at other.
  2. TYPE B - Providing for cable connection at both ends

FEATURES

• High impact resistance & superior insulation properties made out of engineered fibre glass reinforced compound DMC
• Moulded anti tracking material suitable for continuous use in temperature upto 1200C
• Moulded plug sockets are interchangeable with existing metal clad plug & sockets.
• Totally Non corrosive, water proof, tamper proof & shock proof.

DESIGN

• Modern mono-block construction eliminating cumbersome assembly Non reversible i.e different circuits cannot be accidentally interconnected
• Cable clamp on entry point of plug prevents undue pressure on cable connection.
• Plug shroud & cable guard provides adequate protection against arcing if teh plug is inserted on a short circuit.
• Scraping earth feature ensures that the earth connection is made before and broken after the main circuit connection.
• Deeply recessed contact tubes in the sockets keep you safe from accidentally touching the live socket terminals.

FEATURES

• Confirms to IS 13032 & equivalent IEC Standard.
• Available in surface & flush mounting type.
• Busbar Rating 125A/200A for SP, TP application.
• Detachable end plates.
• Enclosures made from CRCA sheet antirust treated with special epoxy polyester powder coated surface finish.

Comming Soon...

Comming Soon...

Comming Soon...

Comming Soon...